![]() If they aren’t, you will run into trouble when it comes to rendering the wall (below). ![]() Top tip: Make sure that the screws are flush when drilled in.You will also need to dampen the wall before you apply the render. It’s also strongly recommended you use battens if this is your first time rendering, as once you can treat the first segment as a tester to see how much render you need for the rest. The battens are usually around 15mm thick and help you divide up the wall into segments for easier lime, sand or cement rendering. If it’s a particularly wide wall, you may want to install a flat, rectangular piece of wood (a batten) at about 900mm apart and ensure the screws, when drilled in, are flush to the wood (flat). How and why you may need to conform to Building Regulationsįirst, take a look at the width of the wall you want to render.The importance of sponging the render and how to do this. ![]() In our guide, we address a range of different types of render such as cement, lime, and sand, and how to achieve the correct mix to create a durable and professional-looking rendered wall. The Guild of Master Craftsmen has created a simple, easy-to-follow guide on how to render a house wall, whether it’s external or internal. However, rendering a wall follows a fairly similar process to plastering a wall, so if this is something you’ve done before, rendering should be no problem. For the first time, novice DIY enthusiasts, rendering a wall might seem like a fairly complex task.
0 Comments
Leave a Reply. |